How To Remove Grout From Wood

Grout is a type of mortar used to fill the gaps between tiles and other surfaces. It is water-resistant and has a strong adhesive quality, making it a great choice for bathrooms, kitchens, and other areas that are likely to get wet.

However, it can also be difficult to remove when it is used on wood surfaces. We discuss how to remove grout from wood and the benefits of doing so.


Preparing for Removal

Before beginning the process of removing grout from wood, it is important to gather the necessary materials. These include a putty knife, a stiff-bristled brush, a bucket of warm water, a container of mild detergent, and a container of vinegar. Once the materials have been gathered, the next step is to prepare the wood surface. This includes wiping down the surface with a damp cloth and vacuuming away any loose debris.


Step-by-Step Guide for Removing Grout From Wood

Now that the materials have been gathered and the wood surface has been prepared, it is time to begin the process of removing grout from wood.


Step 1: Softening the Grout

The first step in removing grout from wood is to soften it. To do this, mix a solution of warm water and mild detergent in a bucket. Dip a stiff-bristled brush into the solution and use it to scrub the grout. This will help to loosen and soften the grout, making it easier to remove.


Step 2: Scraping the Grout

Once the grout has been softened, use a putty knife to scrape it away. Be sure to use a gentle back-and-forth motion, as too much pressure can cause damage to the wood.


Step 3: Cleaning the Wood Surface

After the grout has been removed, use a soft cloth and a solution of warm water and vinegar to clean the wood surface. This will help to remove any residue left behind by the grout.


How do you soften grout off of wood?

You can soften grout for removal using a sugar and water solution, sulfamic acid, a lemon juice solution, or vinegar. You can also apply heat using a heat gun, a blow dryer, or a steam cleaner. Liquid grout softeners are best for the floor as they soak the grout, while heat is best for wall tiles.


How do you get dried grout off of wood trim?

1Mix 1 cup of white granulated sugar into a gallon of hot water. … 2Pour the solution over the grout, or apply it to vertical surfaces with a sponge. … 3Scrape off large chunks of grout using a wooden paint stick. … 4Keep the grout wet with the sugar and water solution as you work.


What dissolves dried grout?

Solutions for Dissolving the Hardened GroutSugared Water – (not to be confused with sugar soap). … Vinegar – Vinegar is an acid and therefore you need to be careful that you do not damage the tile surface. … Other Acids and Sulfamic Acid – These are more powerful acids and the process is the same as with vinegar.

Can you out grout on wood?

When you grout, you have to be very careful where the grout touches the up against the wood table. If you use sanded grout, the sand can scratch the wood finish. Don’t get any more grout on the wood than is necessary.


In this article, we discussed how to remove grout from wood. The process includes gathering the necessary materials, preparing the wood surface, softening the grout, scraping the grout, and cleaning the wood surface. Removing grout from wood can help to restore the wood’s original appearance and prevent damage caused by trapped moisture.



“How to Remove Grout from Wood – Step-by-Step Guide.” Home Repair Tutor, 5 Mar. 2020,

“How to Remove Grout from Wood Flooring.” Bob Vila, 20 June 2017,


Adam Davis